Needing advice & Confirmation on re-installing a 4spd Trans in a 70 454
Hello, I'm a new member and have 3 C-3 cars. Two are running and driving. The 3rd is a 70 454 4spd coupe. I have the 454 back in the car with the bellhousing, clutch, pressure plate all ready to go. The 4 spd cars don't have a removable cross member so I'm having some trouble getting the 4spd transmission back in the car. I'm trying to confirm if I need to remove the 4spd shifter/linkage in order to have enough clearance to slide back the transmission and then line the spline up with the Clutch, pressure plate, and flywheel. I don't have a lift so looking to talk to someone that has done this before I do any additional parts removals.