68 Vette A/C Windshield Wiper Questions
I acquired a 1968 Vette, Coupe 327-300, 4 Spd w/AC
All the dash components, as well as windshield have been removed.
I re-plumbed the vacuum lines for the headlights and wipers. The
headlights doors and lights work BUT I cannot seem to get the
wipers to work.
What is the electrical flow, as well as the vacuum. I have hooked up the
vacuum to the wiper vacuum chamber and the panels will rise and fall, I can
hear the switch activate something when I turn it on low and high as well
as depressing the washer button.
I have replaced the windshield wiper motor, wiper switch (the switch tested
ok per the Wilcox website), .
Where should I start, and what directing should I pursue to properly follow
the flow and find and fix the problem?
This is driving me nuts!
P.S. The Wiper Solenoid (the switch that has both vacuum and electrical
wiring connected to it) was found to be hot when the ignition switch is in
the OFF position