|
curt05 02-12-2009, 02:17 AM gauge locked in at 80 lbs--readout tracks it --it varies -but not accurate --this happened when engine was cold and i got down on it and apparently pegged out the gauge ????????? any comments or fixes would be appreciated :) Blue 92 03-01-2009, 04:55 AM Does it stay at 80 when the key is on but engine not running? If so the sensor is most likely shot. Replacement is the only option. Zephyr99 03-04-2009, 10:41 PM Oil pressure sensors on C5's are prone to go bad. curt05 03-18-2009, 01:26 AM thanks fellows---now can i go in thru the cowl and change it? Blue 92 03-18-2009, 03:26 AM thanks fellows---now can i go in thru the cowl and change it? The approved method is to pull the intake. There is a method that requires you to remove the cowl cover then cut an access hole..... Oil sensor through the vent area (http://www.corvettepics.net/misc/senderventreplace.pdf) curt05 04-18-2009, 10:51 PM thanx a ton blue--that was very helpful info:) | ||